LevelOne FCS-4043 QIG - Page 2
Configuration Tool Bar, Global Setting Parameter, Manual Input Bar, Device List
View all LevelOne FCS-4043 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
English Running the Application 1. Execute the application "LevelOne_IP_Utility.exe". IP Utility will search for devices based on the selected network interface card (NIC) and network segments it binds to. IP Utility will show a dropdown menu if there are multiple NICs available. 2. The default search mode - Basic Search will perform a quick search for available devices in no time, which does not require the input of account/password. 3. Using Advanced Search for Detailed Device Properties 4. For the purposes of installation, system inspection or trouble-shooting, you may need a glance of device basic audio/video properties without accessing the cameras' firmware one by one, which are available through Advanced Search. However, it would take longer to finish searching. The search result will show as picture below which contains four sections-A, B, C and D: A Configuration Tool Bar B Global Setting Parameter C Device List D Manual Input Bar 5. To access the device, simply use the mouse to click on the IP address on the device list. This will initiate the Internet Explorer to allow user to access the device's firmware. 2