LevelOne FCS-4300 Quick Install Guide - Page 9

English Using the Software CD to configure the camera „ Power on your PC and insert the CD-ROM „ The setup page should load automatically. If it does not, please select your CD-ROM drive manually to open the setup page. „ Click "Install Software" (Figure 1-1) „ Select "IP CamLocator" to initiate the installation.(Fifure2-1) „ Click "Yes" and choose which language UI you'd like to install. "Next" -> "Next" to start the installation.(Figure 2-2) „ If you wish to install the software program in an alternate location, click "Browse", otherwise click "Next" to move on to the next step. (Figure 2-3) „ Click "Next" -> "Next"->"Install" to install the software.(Figure 2-4) „ Click "Finish" to complete the software installation.(Figure 2-5) Run "IP CamLocator".The IP CamLocator will show MAC address and an IP Address of available LevelOne Network Cameras. Highlight the MAC address and click on "Link to IE".(Figure 2-6) „ The default user name of network camera is "root" and password is the MAC address (in capital letters). „ The following screen would appear automatically after successful login. Click "Install" and proceed. LevelOne Network Cameras should be active by now. (Figure 2-7) „ Congratulations, you can use the camera through the network to view the video.(Figure 2-8) Installing IP CamSecure Click "IP CamSecure" and follow the onscreen instruction or refer to the user's manual to complete installation.(Figure 3-1)