LevelOne FCS-5043 Manual - Page 47
Maintenance
View all LevelOne FCS-5043 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Network Camera User's Manual Maintenance 1. "Reboot system" The "Reboot" button will reboot the Network Camera. It's useful while the Network Camera got problem. 2. "Restore system" Click on "Restore" button on the configuration page to restore the factory default settings. Restore all settings to factory default except settings in "Network type " and "Root Password". The system will restart and require the installer program to set up the network again. 3. "Calibrate" Recalibrate the auto focus position to the default range to recover the tolerance caused by some external forces. 4. "Export/Import file" -- Export setting backup file: Click to export all parameters for the device and user-defined scripts. -- Upload setting backup file: Click Browse... to upload a setting backup file. Please note that the model and firmware version of the device should be the same as the setting backup file. If you have set up a fixed IP or other special settings for your device, it is not suggested to upload a settings backup file. 4. "Upgrade firmware" Select the firmware file and click upgrade button. Please be aware that you should not turn off the power during updating the firmware and wait for finish message. 47/56