LevelOne FCS-7111 Manual - Page 80
Basic Setting, Advanced Setting, Miscellaneous, Step1, Step 2, Step 3, Step 4
View all LevelOne FCS-7111 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Intelligent Surveillance Solution LevelOne IP CamSecure Install PTZ cameras and follow the instructions of the camera manufacturer. A PTZ camera is usually connected to the PC with RS-485/RS-422. Check the box on the camera list to activate the PTZ control function of a PTZ camera. Basic Setting: Select the camera model, com port, baud rate, and address according to your PTZ camera. Note: If the camera model is an IP PTZ camera, you can work PTZ function directly without the com port, baud rate, and address settings. Advanced Setting: You may setup the pan speed, tilt speed, zoom speed and auto pan speed. Adjust the settings by dragging the bars. Miscellaneous: Patrol Group: You can setup the Patrol Group, please see page 30 for detail. Default PTZ Preset: By enabling this function, the PTZ camera will automatically go back to a default preset point when no PTZ commands are under action. To enable this option, check "Back to PTZ preset after idle" and define idle periods and a default preset point. User-Defined Preset: User-Defined Preset for the analog speed dome can trigger the extra-function of the speed dome itself, for example auto-tracking, login menu of camera...etc. You can refer to the detailed description of each analog speed dome on its user manual. Step1: Type the Preset Name. Preset Number. Step 2: Type the Preset Type. Step 3: Select the Step 4: Press the buttons to Add, Delete, or Update preset setup. - 79 -