LevelOne FEP-1600 Manual - Page 3
Technical Specifications, LED Indicators, Dip Switch Settings vs Power over Ethernet
View all LevelOne FEP-1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
4. Technical Specifications Standards Features Filtering/Forwarding Rates Transmission Media PoE on each Port Output PoE Pin LED Indicators Power Adaptor Dimensions Weight Operating Temperature Humidity Certifications IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3x Flow Control IEEE 802.3af /midspan PoE compliant MAC Address: 2K Buffer Memory: 512K bits Transmission Method: Store and Forward 100Mbps port - 148,800pps 10Mbps port - 14,880pps 10BaseT Cat. 3, 4, 5 UTP/STP 100BaseTX Cat. 5 UTP/STP 15.4W/30W 4, 5, 7, 8 Per Port: Link/Act with 10/100M, PoE ON/OFF Per Unit: Power Input: 100-240VAC, 50~60Hz Output: 56VDC 2.14A (120W) 188 × 118 × 38 mm (L x W x H) 1.5 kg 0 to 50℃ 10 to 90% RH (non-condensing) FCC Class A, CE 5. LED Indicators On the front panel of 16-Port PoE Switch, there are 33 LED indicators as the following; POWER: "Green On" indicates power is on and normal. LINK: "Green On" indicates each Ethernet LAN port is in connection. "Fast Flashing" indicates each Ethernet LAN data activities at 100M. "Slow Flashing" indicates each Ethernet LAN data activities at 10M. PoE: "Green On" indicates Power over Ethernet function is enabled for each port. "OFF" indicates the PoE is disabled, and it becomes a regular LAN port. 6. Dip Switch Settings vs Power over Ethernet Per PoE Port Maximum PoE Power 1 ~ 16 ports DIP ON 15.4/30Watts Injected 115 Watts Note that the dip switches can be switched ON and OFF anytime. However, it is suggested that the dip switches be set ready before the PoE port is connected for power management. The device will be re-started if the overall PoE power consumption is over the power budget. Please make less PoE ports enabled when over the power budget. 3