LevelOne FGP-1000 Manual - Page 3

4. Technical Specifications Standards Features Filtering/Forwarding Rates Transmission Media PoE on each Port Output PoE Pin LED Indicators Power Adaptor Dimensions Weight Operating Temperature Humidity Certifications IEEE 802.3/u 10/100/1000BaseT/TX IEEE 802.3x Flow Control IEEE 802.3at/af PoE compliant midspan PoE compliant MAC Address: 8K Buffer Memory: 512KB Transmission Method: Store and Forward 1000Mbps port - 1,488,000pps 100Mbps port - 148,800pps 10Mbps port - 14,880pps 10BaseT Cat. 3, 4, 5 UTP 100/1000BaseTX Cat. 5 UTP/SFP 15.4W/30W 4, 5, 7, 8 Port 1~8: 10/100M, PoE ON/OFF Power, Port 9,10: 10/100/1000M Input: 100-240VAC, 50~60Hz Output: 52VDC 2.3A (120W) 188 × 118 × 38 mm (L x W x H) 1.5 kg 0 to 50℃ 10 to 90% RH (non-condensing) FCC Class A, CE 5. LED Indicators On the front panel of 8-Port FE PoE + 2-Port GE Switch, there are 19 LED indicators as the following; POWER: "Green On" indicates power is on and normal. Port 1~8 LAN: "Green On" indicates each Ethernet LAN port is in connection. GbE Port 9, 10: "Green On" indicates Gigabit LAN port is in connection. "Yellow On" indicates Fast Ethernet LAN port is in connection. PoE: "Green On" indicates Power over Ethernet function is enabled for each port. "OFF" indicates the PoE is disabled, and it becomes a regular LAN port. 6. Dip Switch Settings vs Power over Ethernet Per PoE Port Maximum PoE Power 1 ~ 8 ports DIP ON 15.4W/30 Watts Injected 115 Watts Note that the dip switches can be switched ON and OFF anytime. However, it is suggested that the dip switches be set ready before the PoE port is connected for power management. The device will be re-started if the overall PoE power consumption is over the power budget. Please make less PoE ports enabled when over the power budget. 3