LevelOne FGS-2800 Manual - Page 11
Status, Indication, 100Mbps Ports, 100/1000Mbps Ports, SFP Ports
View all LevelOne FGS-2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
The following parts are located on the front panel of the switch: LEDs Name Power System 10/100M 1000M Status Indication On Power is on. Flashing Power supply is abnormal. Off Power is off or power supply is abnormal. On The switch is working abnormally. Flashing The switch is working normally. Off The switch is working abnormally. Green On A 100Mbps device is connected to the corresponding port, but no activity. Flashing Data is being transmitted or received. Yellow On A 10Mbps device is connected to the corresponding port, but no activity. Flashing Data is being transmitted or received. Off No device is connected to the corresponding port. Green On A 1000Mbps device is connected to the corresponding port, but no activity. Flashing Data is being transmitted or received. Yellow On A 10/100Mbps device is connected to the corresponding port, but no activity. Flashing Data is being transmitted or received. Off No device is connected to the corresponding port. 10/100Mbps Ports: Designed to connect to the device with a bandwidth of 10Mbps or 100Mbps. Each has a corresponding 10/100M LED. 10/100/1000Mbps Ports: Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or 1000Mbps. Each has a corresponding 10/100/1000M LED. SFP Ports: Designed to install the SFP module. FGS-2800 features 2 Combo SFP Slots. Port 27F shares the same LED with Port 27 and Port 28F shares the same LED with Port 28. The Port 27F (28F) and Port 27 (28) are referred to as ―combo‖ ports, which means they cannot be used simultaneously, otherwise only SFP ports work. The SFP module supports hot-plugging. Note: When using the SFP port with a 100M module or a gigabit module, you need to configure its corresponding Speed and Duplex mode on Switching → Port → Port Config page. For 100M module, please select 100MFD while select 1000MFD for gigabit module. By default, the Speed and Duplex mode of SFP port is 1000MFD. 6