LevelOne FVT-2001 Quick Install Guide - Page 10
Link Lost Forwarding, Pure Converter mode
View all LevelOne FVT-2001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Link Lost Forwarding: When LLF is enable, allow UTP link failures to be reported to the fiber side and also allow Fiber link failure to be reported to the UTP side. Therefore, A link loss forward feature is provided in both UTP and Fiber side. Pure Converter mode (Fast Ethernet Module): When pure converter mode is enabling (on), it operates with the minimum latency. The transmission flow does not wait until entire frame is ready, but instead it forwards the received data immediately after the data being received. And TP port should be forced at 100M in this application. When DIP-Switch is in Switch Converter mode (off), the converter function is same as Switch Hub. Note: Please don't change the DIP-switch setting when UTP or fiber port is transmitting or receiving data. It may cause some data error. 8