LevelOne GEP-5070 Manual - Page 288
Restoring Factory Defaults, Upgrading Firmware, Factory Defaults
View all LevelOne GEP-5070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 288 highlights
CHAPTER 7 | Performing System Maintenance Restoring Factory Defaults RESTORING FACTORY DEFAULTS Use the Factory Defaults page to restore the original factory settings, except for the management IP parameters. CAUTION: To restore the factory defaults for all settings (including the management IP settings), connect a cable from port 1 to port 2, and then reset power to the switch. PATH Maintenance, Restart Device WEB INTERFACE To restore factory defaults: 1. Click Maintenance, Factory Defaults. 2. Click Yes. The factory defaults are immediately restored, which means that no reboot is necessary. Figure 153: Factory Defaults UPGRADING FIRMWARE Use the Software Upload page to upgrade the switch's system firmware by specifying a file provided by LevelOne. You can download firmware files for your switch from the LevelOne web site. PATH Maintenance, Software Upload WEB INTERFACE To upgrade firmware: 1. Click Maintenance, Software Upload. 2. Click the Browse button, and select the firmware file. - 288 -