LevelOne GSW-4876 Manual - Page 61

CHAPTER 4 | Configuring the Switch Configuring Security ■ Security: Authentication, System Access Management, Port (contains Dot1x port, MAC based and the MAC Address Limit), ACL, HTTPS, SSH, ARP Inspection, and IP source guard. ■ IP: Everything except for ping. ■ Port: Everything except for VeriPHY. ■ Diagnostics: ping and VeriPHY. ■ Maintenance: CLI - System Reboot, System Restore Default, System Password, Configuration Save, Configuration Load and Firmware Load. Web - Users, Privilege Levels and everything in Maintenance. ■ Debug: Only present in CLI. ◆ Privilege levels - Every privilege level group can be configured to access the following modules or system settings: Configuration Readonly, Configuration/Execute Read-write, Status/Statistics Read-only, and Status/Statistics Read-write (e.g., clearing statistics). The default settings provide four access levels: ■ 1 - Read access of port status and statistics. ■ 5 - Read access of all system functions except for maintenance and debugging ■ 10 - read and write access of all system functions except for maintenance and debugging ■ 15 - read and write access of all system functions including maintenance and debugging. WEB INTERFACE To configure privilege levels: 1. Click Advanced Configuration, Security, Switch, Privilege Levels. 2. Set the required privilege level for any software module or functional group. 3. Click Save. - 61 -