LevelOne GTL-2880 Datasheet - Page 2
Standard Compliance, Performance, Software, Hardware
View all LevelOne GTL-2880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
www.level1.com I one world_one brand_one level_ L2 Managed GE 3 Technical Specification Standard Compliance IEEE 802.3 10-BASE-T (Ethernet) IEEE 802.3u 100-BASE-TX (Fast Ethernet) IEEE 802.3ab 1000BASE-T (Gigabit Ethernet) IEEE 802.1D MAC Bridges IEEE802.1p priority tags IEEE802.1Q VLAN IEEE802.3ac VLAN tagging IEEE802.3ad Link aggregation control protocol IEEE802.1w Fast Spanning Tree IEEE802.1X authentication IEEE802.3az Energy Efficient Ethernet Performance Switching Capacity: 128 Gbps switching fabric with up to 95 Mbps forwarding rates 8K MAC addresses entries with auto-learning function Supports Jumbo frame, up to 9.8K Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port Port Mirroring Network Interface 20 x RJ-45 10/100/1000BASE-T ports 4x Gigabit RJ-45/SFP (Mini-GBIC) shared slots 4x 10G Gigabit SFP plus slots Software Layer 2 feature Spanning Tree Protocol: - IEEE 802.1D Spanning Tree Protocol (STP) - IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) - IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) Trunking: - IEEE 802.3ad Link Aggregation Control Protocol (LACP) - Trunk groups: 14, up to 8 ports per group VLAN: - Support up to 4K VLANS simultaneously (1~4094 VLAN IDs) - IEEE 802.1q tag-base VLAN - protocol-based VLAN - MAC-based VLAN - Management VLAN - GVRP Supported DHCP Relay (Layer 2): - Relay of DHCP traffic to DHCP server in different VLAN. IGMP Snooping: - IGMP v1/v2/v3 snooping - IGMP Queried - IGMP Proxy Security SSH v1/v2 supported HTTPS/SSL IEEE 802.1X Dynamic VLAN assignment PVE: L2 isolation between clients in the same VLAN Port based/MAC based/ IP address based security Radius/Tacacs+ authentication supports Storm control: Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port ACLs: Support for up to 512 entries QoS Priority Queues: 8 hardware queues per port Traffic classification based on IEEE 802.1p CoS, IP Precedence, DSCP, Supports Layer 4 TCP/UDP port and ToS classification Rate Limiting: Ingress policer; egress shaping and rate control Management Switch Management: CLI via console port or Telnet Web management SNMP v1, v2c, v3 User-based Security Model (USM) Firmware & Configuration: Dual firmware images Firmware upgrade via web browser (HTTP/HTTPS) and TFTP server, or console port. RMON (groups 1, 2, 3 and 9) Easy Configuration Port (ECP) can configure client's QoS and security capabilities. Single IP management (SIP): Single IP management for a virtual stack function of up to 32 switches of GTL-2880/GTL-5280/GTP-2880/GTL-1072 UPnP s-Flow Event / Error Log / Syslog LLDP IPv6 feature: - IPv6 host mode - IPv6 stateless address auto-configuration - Duplicate address detection (DAD) - ICMP version6 - IPv6 QoS Prioritize IPv6 packets in hardware Green Ethernet IEEE 802.3az Energy Efficient function: Automatically turns off Ethernet port when detecting link down or Idle of client Cable length detection: - Adjusts the signal strength based on the cable length - Reduces the power consumption for cables shorter Hardware LED Indication System LED, Link/Act, Speed, Gigabit Port activity LED and SFP/ SFP PLUS Module LED Dimension 442mm (W) x 300mm (D) x 44mm (H) Weight 3.9Kg Power Supply 100-240 VAC 50~60 Hz, internal , universal Temperature Operating: 0°C ~ 45°C Storage: -20°C ~ 70°C Humidity Operating: 10% ~ 90% (Non-condensing) Certifications CE, FCC