LevelOne HVE-9001 Manual - Page 15

INSTALLATION Extends HDMI signals to one display at longer distance HVE-9000 & HVE-9001 1. Connect HVE-9001 to a HDMI source device with a HDMI cable. 2. Connect HVE-9000 to a HDMI display or projector with a HDMI cable. 3. Connect a Cat.5e/6 cable between HVE-9000 and HVE-9001. 4. Make sure this Cat.5e/6 cable is tightly connected and not loose. 5. Plug in a 5V DC power supply unit to the power jack of HVE-9000. 6. Plug in another 5V DC power supply unit to the power jack of HVE-9001. 7. If the image on the display is flickering or blinking, adjust the rotary control switch to improve the cable skew. 0 stands for the strongest HDMI signal level for longest possible transmission length while 7 stands for the weakest HDMI signal level for short transmission length. Use a screw driver to adjust the signal level from 7 to 0 and stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate signal level setting may cause overpowering issue that would shorten the product life significantly! HDMI cable HDTV HVE-9000 HDMI cable Cat.5e/6 cable Blu-ray Disc player HVE-9001 14