LevelOne HVE-9005 Manual - Page 9

HDMI PIN DEFINITION Type A (Receptacle) HDMI Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 TMDS Data2+ TMDS Data2 Shield TMDS Data2- TMDS Data1+ TMDS Data1 Shield TMDS Data1- TMDS Data0+ TMDS Data0 Shield TMDS Data0- TMDS Clock+ Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 Pin 16 Pin 17 Pin 18 Pin 19 TMDS Clock Shield TMDS Clock- CEC Reserved (N.C. on device) SCL SDA DDC/CEC Ground +5V Power Hot Plug Detect HARDWARE INSTALLATION 1. Connect a HDMI or DVI source (such as a Blu-ray Disc player) to the transmitting unit HVE-9005T. 2. Connect a HDMI or DVI display (such as a LCD TV) to the receiving unit HVE-9005R. 3. Connect IR Blaster/Receiver to both T and R units. 4. Connect a Cat-5/5e/6 cable between the transmitting and receiving units. 5. Make sure this Cat-5/5e/6 cable is tightly connected and not loose. 6. Plug in 5V DC power supply unit to the power jack of the receiving unit HVE-9005R and the transmitting unit HVE-9005T. 7