LevelOne HVE-9200 Manual - Page 6
Installation
View all LevelOne HVE-9200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Installation 1. Turn off power of all connecting equipment, including video sources and displays. 2. Connect all cable referring to diagram or designed topology. Attach power cable, HDMI cables from video source to Transmitter and from Receiver to displays, Ethernet cables connecting between Transmitters and Receivers. Optional connection for RS-232, IR cable if required. 3. AWARE with IR cables connection. Wrong wiring of cables may cause fatal damage to the receptacle of IR cables. IR IN = Cable with the ROUND type module IR OUT = Cable with the STICK type module 4. Turn on extenders power first, display devices, lastly video sources. 5. The built-in EDID management will automatically select the resolution setting that could successfully display to all connected screens (local and remote). Usually the setting of lowest resolution display is selected. EDID management refreshes setting when display devices are plugged or unplugged. 6