LevelOne IEC-1040 Datasheet - Page 1

IEC-1040 10/100 Industrial Media Converter, SC SM 40KM -40 to 75C Overview LevelOne IEC-1040 is an industrial Fast Ethernet media converter with a rugged aluminium case which providing superb heat dissipation. This converter is designed to be mounted on an industrial standard DIN-rail, plus the clearly visible status LEDs provide simple monitoring of port link activity. It also features Link Fault Pass Through in order to alert remote location when link status changes. Safety Complies with NEMA (National Manufacturers Association) TS1 & TS2 Environmental certi ed for the Tra c Control Equipment that withstand extreme temperatures, operating voltage and humidity uctuation, vibration and shock commonly experienced in severe outdoor environments. Fault Detection Relay contact sends alert signal when the power failed or a port link disconnected, therefore the system operator can respond quickly. This relay contact can be easily con gured with a simple DIP switch. High Reliability All components are built to withstand harsh environment applications without compromise where humidity, temperature variation and even shock vibration are concerns, including Electric & Utility, Critical Infrastructure, Transportation and Surveillance Security. This device operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature. Features - 100Base-FX Single-mode ber for the link up to 40 kilometers - Complies with NEMA TS1 & TS2 Environmental requirements for Tra c control equipment - Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment - ISA 12.12.01 (UL1604) Class I, Division 2 Classi ed for use in hazardous locations with DC Terminal Block power - DIP switch con guration for "Link-Fault-Pass-Through," link down alarm, speed, duplex mode - 128K bits bu er memory - 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX - Full wire-speed forwarding rate - Alarms for power and port link failure by relay output - -40°C to 75°C (-40°F to 167°F) operating temperature range, tested for functional operation @ -40°C to 85°C (-40°F to 185°F) - IP30 aluminum case - Supports DIN-rail mounting installation Diagrams Unit: mm 50 DC TERMINAL BLOCK 135 PWR1 GND PWR2 GND FAULT 110 Front Side Back Top Buttom