LevelOne IEC-1040 Quick Install Guide - Page 1
LevelOne IEC-1040 Manual
View all LevelOne IEC-1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
IEC-1040 10/100BASE-TX to 100FX Industrial Media Converter, SC SM 40km, -40 to 75C Quick Installation Guide v1.00 ‐ 1209 Features 100Base-FX Single-mode fibre for the link up to 40 kilometres Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment ISA 12.12.01 (UL1604) Class I, Division 2 Classified for use in hazardous locations with DC Terminal Block power DIP switch configuration for "Link-Fault-Pass-Through," link down alarm, speed, duplex mode 128K bits buffer memory 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto- MDI/MDIX Full wire-speed forwarding rate Alarms for power and port link failure by relay output -40°C to 75°C (-40°F to 167°F) operating temperature range IP30 aluminium case Supports DIN-rail mounting installation Package Contents IEC-1040 Quick Installation Guide IEC-1040 Page 2 Overview LevelOne IEC-1040 is an industrial Fast Ethernet media converter with a rugged aluminium case which providing superb heat dissipation. This converter is designed to be mounted on an industrial standard DIN-rail, plus the clearly visible status LEDs provide simple monitoring of port link activity. It also features Link Fault Pass Through in order to alert remote location when link status changes Fault Detection Relay contact sends alert signal when the power failed or a port link disconnected, therefore the system operator can respond quickly. This relay contact can be easily configured with a simple DIP switch High Reliability All components are built to withstand harsh environment applications without compromise where humidity, temperature variation and even shock vibration are concerns, including Electric & Utility, Critical Infrastructure, Transportation and Surveillance Security. This device operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature. Safety Complies with NEMA (National Manufacturers Association) TS1 & TS2 Environmental certified for the Traffic Control Equipment that withstand extreme temperatures, operating voltage and humidity fluctuation, vibration and shock commonly experienced in severe outdoor environments. IEC-1040 Page 1 LED Status LED PW 1,2 FAULT LNK/ACT FDX/COL 100 (Mbps) LFP Status Steady Off Steady Off Steady Flashing Off Steady Flashing Off Steady Off Steady Off LFPT: Link Forward Pass Through Description Power On Power Off Redundant Power or Ports are failed Redundant Power or Ports are normal Network connection is established Transmitting or Receiving data No connection occurred Full duplex mode Collision occurred Half duplex mode Connection at 100Mbps speed Connection at 10Mbps speed LFPT is enabled LFPT is disabled IEC-1040 Page 3