LevelOne IEC-2001 Quick Install Guide - Page 1
LevelOne IEC-2001 Manual
View all LevelOne IEC-2001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
IEC-2001 10/100/1000 Industrial Media Converter, SC MM 550M, -40 to 75C Quick Installation Guide v1.00 ‐ 1209 Features Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment Supports 1000SX Multimode SC fibre up to 550 meters DIP switch configuration for "Link-Fault-Pass-Through," link down alarm, speed, duplex mode 1000Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX Full wire-speed forwarding rate Alarms for power and port link failure by relay output -40°C to 75°C (-40°F to 167°F) operating temperature range IP30 aluminium case Supports DIN-rail mounting installation Package Contents IEC-2001 Quick Installation Guide IEC-2001 Page 2 Overview LevelOne IEC-2001 is an industrial Gigabit Ethernet media converter with a rugged aluminium case which providing superb heat dissipation. This converter is designed to be mounted on an industrial standard DIN-rail, plus the clearly visible status LEDs provide simple monitoring of port link activity. It also features Link Fault Pass Through in order to alert remote location when link status changes Fault Detection Relay contact sends alert signal when the power failed or a port link disconnected, therefore the system operator can respond quickly. This relay contact can be easily configured with a simple DIP switch High Reliability All components are built to withstand harsh environment applications without compromise where humidity, temperature variation and even shock vibration are concerns, including Electric & Utility, Critical Infrastructure, Transportation and Surveillance Security. This device operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature. Safety Complies with NEMA (National Manufacturers Association) TS1 & TS2 Environmental certified for the Traffic Control Equipment that withstand extreme temperatures, operating voltage and humidity fluctuation, vibration and shock commonly experienced in severe outdoor environments. IEC-2001 Page 1 LED Status LED PW 1,2,3 FAULT LNK/ACT FDX/COL 1000 100 LFPT Status Steady Off Steady Off Steady Flashing Off Steady Flashing Off Steady Off Steady Off Steady Off LFPT: Link Forward Pass Through Description Power On Power Off Redundant Power or Ports are failed Redundant Power or Ports are normal Network connection is established Transmitting or Receiving data No connection occurred Full duplex mode Collision occurred Half duplex mode Connection at 1000Mbps speed No connection Connection at 100Mbps speed Connection at 10Mbps speed LFPT is enabled LFPT is disabled IEC-2001 Page 3