LevelOne IES-0831 Datasheet - Page 2

Speci cations Technology Standards Forward and Filtering Rate Packet Buffer Memory IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX/FX, IEEE802.3x 14,880pps for 10Mbps 148,810pps for 100Mbps 448K bits Processing Type Address Table Size Store-and-Forward Half-duplex back-pressure and IEEE802.3x full-duplex flow control 2048 MAC addresses Power Input Power Consumption Reverse Polarity Protection Input Voltage: 12VDC (DC Jack); 12 to 48VDC (Terminal Block) 6W Max. 12VDC @ 0.5A, 24VDC @ 0.25A, 48VDC @ 0.125A Present Mechanical Casing Aluminum case Dimensions Weight 60mm (W) x 125mm (D) x 145mm (H) (2.36" (W) x 4.92" (D) x 5.7" (H)) 1Kg (2.2lbs.) Installation DIN-Rail, Panel Mounting Interface LED Indicators Alarm Contact Per Unit: Power Status: Power 1, 2, 3 (Green), Fault (Red) Per Port: 10/100TX, 100FX: Link/Activity (Green) 10/100TX: 100 (Green) One relay output with current 1A @ 24VDC Environment Operating Temperature Storage Temperature Ambient Relative Humidity MTBF -40°C to 75°C (-40°F to 167°F) Tested @ -40°C to 85°C (-40°F to 185°F) -40°C to 85°C (-40°F to 185°F) 5% to 95% (non-condensing) 38.89 years Regulatory Approvals ISO Manufactured in an ISO9001 facility Safety UL508 (Pending) EMI FCC Part 15, Class A EN61000-6-4 - EN55022 - EN61000-3-2 - EN61000-3-3 EMS EN61000-6-2 - EN61000-4-2 (ESD Standards) Contact: + / - 8KV; Criteria B Air: + / - 15KV; Criteria B - EN61000-4-3 (Radiated FRI Standards) 35V/m, 80 to 3G; 80% AM Criteria A - EN61000-4-4 (Burst Standards) Signal Ports: + / - 4KV D.C. Power Ports: + / - 4KV; Criteria B A.C. Power Ports: + / - 4KV; Criteria B - EN61000-4-5 (Surge Standards) Signal Ports: + / - 2KV; Line-to-Line; Criteria B D.C. Power Ports: + / - 4KV; Line-to-Earth; Criteria B - EN61000-4-6 (Induced RFI Standards) Signal Ports: 10V @ 0.15 - 80MHz; Criteria A D.C. Power Ports: 10V @ 0.15 - 80MHz; Criteria A A.C. Power Ports: 10V @ 0.15 - 80MHz; Criteria A Earth Ground Ports: 10V @ 0.15 - 80MHz; Criteria A - EN61000-4-8 (Magnetic Field Standards) 1000A/m @ 50, 60Hz; Criteria A - IEC61000-4-10 (Oscillatory wave magnetic field test) 100kHz and 1MHz: 30A/m - IEC 61000-4-16 (Power frequency immunity test) 50Hz: 300V - IEC 61000-4-18 (oscillatory wave immunity test): 100 kHz, 2.5kV CM and 2.5kV DM 1MHz , 2.5kV CM and 2.5kV DM - IEEE1613: power frequency withstand voltage: 2KV, Insulation resistance >550 MOhm RJ45 Port 500V, Insulation resistance >550 MOhm Impulse voltage: 5Kv, Insulation resistance >550 MOhm IEC 60870-2-1: AC/DC power supply voltage variations Environmental Test Compliance IEC60068-2-6 (Vibration Resistance) 5G @ 150Hz; Criterion 3 (Operation/Storage/Transport) IEC60068-2-27 (Shock) 25G @ 11ms (Half-Sine Shock Pulse; Operation) 50G @ 11ms (Half-Sine Shock Pulse; Storage/Transport) IEC60068-2-32 (Free Fall) 1M (3.281ft.) Order Information - IES-0831 6 FE + 2 MM SC Unmanaged Switch -40 to 75, DIN-rail, IEC61850 Package Contents IES-0831 Quick Installation Guide www.level1.com one world_one brand_one level_