LevelOne IES-1084 Datasheet - Page 1

IES-1084 4 x 802.3af + 4 x 802.3at + 2 GE TX Managed Switch -40 to 75C, DIN-rail Overview LevelOne IES-1084 Industry Ethernet Switch provides 4 802.3af PoE ports & 4 802.3at PoE ports of 10/100Base-TX plus 2 ports of 10/100/1000Base Gigabit Ethernet to enable high speed network at mission-critical environment. This device is designed to be mounted on an industry standard DIN-rail, plus the clearly visible status LEDs provide simple monitoring of port link activity. Resilient Ring Network Supports Ring topology network providing simple installation and ultra fast network recovery performance, less than 15ms. Unlike much complex resilient topology, such as a redundant star, the Ring simpli es the network design and requires less cabling installation. In addition, fast network recovery time helps minimize system downtime. High Reliability All components are built to withstand harsh environment applications without compromise where humidity, temperature variation and even shock vibration are concerns, including Electric & Utility, Critical Infrastructure, Transportation and Surveillance Security. This device operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature. Management IES-1084 supports a variety of management features including: CLI via Console or Telnet; Graphic User Interface via Web Browser or Simple Network Management Protocol via SNMP tools. It provides better visibility and management of those critical assets. Power over Ethernet This switch is Power Sourcing Equipment (PSE), and it is fully complied with IEEE 802.3af & 802.3at PoE standard at maximum 15.4W / 30W power budget per port. It helps to save infrastructure wiring costs dramatically by eliminating electric wiring and less UPS needed. Features - Supports PoE Power Sourcing Equipment (PSE) - PoE control and scheduling - Supports α-ring and RSTP/MSTP/STP for Ethernet redundancy - IP Multicast Filtering through IGMP Snooping V1, V2 & V3 - Supports port-based VLAN and IEEE802.1Q VLAN Tagging and GVRP - IEEE802.1p QoS with four priority queues - MAC-based trunking with automatic link fail-over - RS-232 console, Telnet, SNMP V1, V2c & V3, RMON, Web Browser, and TFTP Management - Supports Command Line Interface in RS-232 Console Diagrams Safety This device has been tested under UL508 standard for Industrial Control Equipment to endurance under test turn on and o 6,000 times while loaded, with no single failure. It's highly reliability and safety measurement to ensure eld hardened, especially for the harsh environment. - Supports IEEE802.1x Security - Bandwidth Rate Control - Per-port programmable MAC address locking - Up to 24 Static Secure MAC addresses per port - Port mirroring - NTP synchronization - 1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX - Full wire-speed forwarding rate - -40°C to 75°C (-40°F to 167°F) operating temperature range, tested for functional operation @ -40°C to 85°C (-40°F to 185°F) Unit: mm 71.4 140 Power 3 Reset Power 1 Power 2 ++ 170 Front Side Top Buttom