LevelOne IES-1620 Datasheet - Page 2

Order Information, Specifications, Package Contents

Page 2 highlights

Speci cations Technology Standards Forward and Filtering Rate Packet Buffer Memory Processing Type Address Table Size Latency IEEE802.3 10BASE-T, IEEE802.3u 100BASETX/100BASE-FX, IEEE802.3x 14,880pps for 10Mbps 148,810pps for 100Mbps 1.625M bits Store-and-Forward Half-duplex back-pressure and IEEE802.3x full-duplex flow control 4096 MAC addresses Less than 10μs Power Input Power Consumption Overload Current Protection Mechanical Casing Dimensions Weight Input Voltage: 12 to 48VDC (Terminal Block) 12VDC (DC Jack) 7.4W Max. 0.6A @ 12VDC, 0.3A @ 24VDC, 0.15A @ 48VDC Present Aluminum case IP30 75.5mm (W) x 110mm (D) x 135mm (H) (2.98" (W) x 4.33" (D) x 5.31" (H)) 0.87Kg (1.92lbs.) Installation DIN-Rail (Top hat type 35mm), Panel, Rack Mounting Interface Ethernet Port LED Indicators Alarm Contact 10/100BASE-TX: 16, 15 or 14 ports 100BASE-FX: 0, 1 or 2 ports Per Unit: Power Status (Power 1, Power 2, Power 3) Per Port: 10/100TX, 100FX: Link/Activity One relay output with current 1A @ 24VDC Environment Operating Temperature Storage Temperature Ambient Relative Humidity MTBF -40°C to 75°C (-40°F to 167°F) Tested @ -40°C to 85°C (-40°F to 185°F) -40°C to 85°C (-40°F to 185°F) 5% to 95% (non-condensing) 106.94 years Regulatory Approvals ISO Manufactured in an ISO9001 facility Safety UL508 EMI FCC Part 15, Class A, VCCI EN61000-6-4 - EN55022 - EN61000-3-2 - EN61000-3-3 EMS EN61000-6-2 - EN61000-4-2 (ESD Standards) Contact: + / - 6KV; Criteria B Air: + / - 8KV; Criteria B - EN61000-4-3 (Radiated RFI Standards) 10V/m, 80 to 1000MHz; 80% AM Criteria A 3V/m, 1400 to 2000MHz; 80% AM Criteria A 1V/m, 2000 to 2700MHz; 80% AM Criteria A - EN61000-4-4 (Burst Standards) Signal Ports: + / - 4KV; Criteria B D.C. Power Ports: + / - 4KV; Criteria B - EN61000-4-5 (Surge Standards) Signal Ports: + / - 1KV; Line-to-Line; Criteria B D.C. Power Ports: + / - 0.5KV; Line-to-Earth; Criteria B - EN61000-4-6 (Induced RFI Standards) Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A - EN61000-4-8 (Magnetic Field Standards) 30A/m @ 50, 60Hz; Criteria A Environmental Test Compliance IEC60068-2-6 Fc (Vibration Resistance) 5g @ 10 - 150KHz, Amplitude 0.35mm (Operation/Storage/Transport) IEC60068-2-27 Ea (Shock) 25g @ 11ms (Half-Sine Shock Pulse; Operation) 50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) IEC60068-2-32 Ed (Free Fall) 1M (3.281ft.) Order Information - IES-1620 16 FE Unmanaged Switch -40 to 75, DIN-rail Package Contents IES-1620 Quick Installation Guide www.level1.com one world_one brand_one level_

  • 1
  • 2

Order Information
IES-1620
-
16 FE Unmanaged Switch -40 to 75, DIN-rail
Specifications
Package Contents
IES-1620
Quick Installation Guide
www.level1.com
one world_one brand_one level_
MTBF
106.94 years
Technology
Standards
IEEE802.3 10BASE-T, IEEE802.3u 100BASE-
TX/100BASE-FX, IEEE802.3x
Forward and
Filtering Rate
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer
Memory
1.625M bits
Processing
Type
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex
flow control
Address Table
Size
4096 MAC addresses
Latency
Less than 10μs
Environment
Operating
Temperature
-40°C to 75°C (-40°F to 167°F)
Tested @ -40°C to 85°C (-40°F to 185°F)
Storage
Temperature
-40°C to 85°C (-40°F to 185°F)
Ambient
Relative
Humidity
5% to 95% (non-condensing)
Regulatory Approvals
ISO
Manufactured in an ISO9001 facility
Safety
UL508
EMI
FCC Part 15, Class A, VCCI
EN61000-6-4
- EN55022
- EN61000-3-2
- EN61000-3-3
EMS
EN61000-6-2
- EN61000-4-2 (ESD Standards)
Contact: + / - 6KV; Criteria B
Air: + / - 8KV; Criteria B
- EN61000-4-3 (Radiated RFI Standards)
10V/m, 80 to 1000MHz; 80% AM Criteria A
3V/m, 1400 to 2000MHz; 80% AM Criteria A
1V/m, 2000 to 2700MHz; 80% AM Criteria A
- EN61000-4-4 (Burst Standards)
Signal Ports: + / - 4KV; Criteria B
D.C. Power Ports: + / - 4KV; Criteria B
- EN61000-4-5 (Surge Standards)
Signal Ports: + / - 1KV; Line-to-Line; Criteria B
D.C. Power Ports: + / - 0.5KV; Line-to-Earth; Criteria B
- EN61000-4-6 (Induced RFI Standards)
Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A
D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80%
AM Criteria A
- EN61000-4-8 (Magnetic Field Standards)
30A/m @ 50, 60Hz; Criteria A
Environmental
Test
Compliance
IEC60068-2-6 Fc (Vibration Resistance)
5g @ 10 - 150KHz, Amplitude 0.35mm
(Operation/Storage/Transport)
IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
IEC60068-2-32 Ed (Free Fall)
1M (3.281ft.)
Power
Input
Input Voltage:
12 to 48VDC (Terminal Block)
12VDC (DC Jack)
Power
Consumption
7.4W Max. 0.6A @ 12VDC, 0.3A @ 24VDC, 0.15A @
48VDC
Overload
Current
Protection
Present
Mechanical
Casing
Aluminum case
IP30
Dimensions
75.5mm (W) x 110mm (D) x 135mm (H)
(2.98" (W) x 4.33" (D) x 5.31" (H))
Weight
0.87Kg (1.92lbs.)
Installation
DIN-Rail (Top hat type 35mm), Panel, Rack Mounting
Interface
Ethernet Port
10/100BASE-TX: 16, 15 or 14 ports
100BASE-FX: 0, 1 or 2 ports
LED Indicators
Per Unit: Power Status (Power 1, Power 2, Power 3)
Per Port: 10/100TX, 100FX: Link/Activity
Alarm Contact
One relay output with current 1A @ 24VDC