LevelOne IES-1820 Datasheet - Page 1

LevelOne IES-1820 Manual

Page 1 highlights

IES-1820 16 x 802.3at + 2GE SFP Combo Unmanaged Switch -40 to 75C Overview LevelOne IES-1820 Industry Ethernet Switch provides 16 PoE ports 10/100Base plus 2 port Gigabit Combo SFP to enable high speed network at mission-critical environment. With the 1U height rack-mountable size, this switch can be easily installed in the cabinet, plus the clearly visible status LEDs provide simple monitoring of port link activity. Moreover, the SFP slots support pluggable modules that enabling you to choose from a variety of transceivers. Safety This device has been tested under UL508 standard for Industrial Control Equipment to endurance under test turn on and o 6,000 times while loaded, with no single failure; also with NEMA (National Manufacturers Association) TS2 Environmental certi ed for the Tra c Control Equipment that withstand extreme temperatures, operating voltage and humidity uctuation, vibration and shock commonly experienced in severe outdoor environments. High Reliability All components are built to withstand harsh environment applications without compromise where humidity, temperature variation and even shock vibration are concerns, including Electric & Utility, Critical Infrastructure, Transportation and Surveillance Security. This device operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature. Plug & Play This unmanaged Industrial Ethernet Switch is designed for the demanding industrial environments at businesses in need of instant connectivity with no setup or con gure required, truly plug and play. Power over Ethernet This switch is Power Sourcing Equipment (PSE), and it is fully complied with IEEE 802.3at PoE standard at maximum 30W power budget per port. It helps to save infrastructure wiring costs dramatically by eliminating electric wiring and less UPS needed. Also, it is compatible with IEEE802.3af standard PD devices. Features Redundancy This redundant power system is designed to meet the challenge of power failure to ensure reliability and constant availability. Single power design works ne in non-critical network applications, but it falls short drastically for network applications in transportation, automate production or banking. - Provides 16 10/100Base-TX PoE ports and 2 Gigabit/SFP ports - 4096 MAC addresses - 2.25M bits bu er memory - PoE ports can support the IEEE 802.3at standard and power up 30W devices - -40°C to 75°C (-40°F to 167°F) operating temperature range - 1000 Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX - Alarms for power failure by relay output - Supports Rack Mounting installation - Complies with NEMA TS2 Environmental requirements for Tra c control equipment - Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment - UL508 Diagrams Unit: mm 205 442 44 Back Front Top Side

  • 1
  • 2

Overview
LevelOne IES-1820 Industry Ethernet Switch provides 16 PoE ports
10/100Base plus 2 port Gigabit Combo SFP to enable high speed
network at mission-critical environment. With the 1U height
rack-mountable size, this switch can be easily installed in the cabinet,
plus the clearly visible status LEDs provide simple monitoring of port link
activity. Moreover, the SFP slots support pluggable modules that
enabling you to choose from a variety of transceivers.
High Reliability
All components are built to withstand harsh environment applications
without compromise where humidity, temperature variation and even
shock vibration are concerns, including Electric & Utility, Critical
Infrastructure, Transportation and Surveillance Security. This device
operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature.
Features
- Provides 16 10/100Base-TX PoE ports and 2 Gigabit/SFP ports
- 4096 MAC addresses
- 2.25M bits buffer memory
- PoE ports can support the IEEE 802.3at standard and power up 30W
devices
- -40°C to 75°C (-40°F to 167°F) operating temperature range
- 1000 Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex,
Auto-Negotiation, Auto-MDI/MDIX
- Alarms for power failure by relay output
- Supports Rack Mounting installation
- Complies with NEMA TS2 Environmental requirements for Traffic
control equipment
- Complies with IEC61000-6-2 EMC Generic standard immunity for
Industrial environment
- UL508
Safety
This device has been tested under UL508 standard for Industrial Control
Equipment to endurance under test turn on and off 6,000 times while
loaded, with no single failure; also with NEMA (National Manufacturers
Association) TS2 Environmental certified for the Traffic Control
Equipment that withstand extreme temperatures, operating voltage and
humidity fluctuation, vibration and shock commonly experienced in
severe outdoor environments.
Plug & Play
This unmanaged Industrial Ethernet Switch is designed for the
demanding industrial environments at businesses in need of instant
connectivity with no setup or configure required, truly plug and play.
Redundancy
This redundant power system is designed to meet the challenge of
power failure to ensure reliability and constant availability. Single power
design works fine in non-critical network applications, but it falls short
drastically for network applications in transportation, automate
production or banking.
Power over Ethernet
This switch is Power Sourcing Equipment (PSE), and it is fully complied
with IEEE 802.3at PoE standard at maximum 30W power budget per
port. It helps to save infrastructure wiring costs dramatically by
eliminating electric wiring and less UPS needed. Also, it is compatible
with IEEE802.3af standard PD devices.
Diagrams
Unit: mm
Side
Top
Back
Front
IES-1820
16 x 802.3at + 2GE SFP Combo Unmanaged Switch
-40 to 75C
205
442
44