LevelOne IES-1881 Manual - Page 6
Web Configuration
View all LevelOne IES-1881 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
At the "switch_a#" prompt just type in "configure terminal" and press to logon to Configure Mode (or Configure Terminal Mode). And the "switch_a(config)#" prompt will show on the screen. Set new IP address and subnet mask for Switch: At the "switch_a(config)#" prompt just type in "interface vlan1.1" and press to logon to vlan 1 (vlan1.1 means vlan 1). And the "switch_a(config-if)#" prompt will show on the screen. Command Syntax: "ip address A.B.C.D/M". "A.B.C.D" specifies IP address. "M" specifies IP subnet mask. "M"= 8: 255.0.0.0, 16:255.255.0.0, or 24: 255.255.255.0. For example, At the "switch_a(config-if)#" prompt just type in "ip address 192.168.1.10/24" and press to set new IP address (192.168.1.10) and new IP subnet mask (255.255.255.0) for Switch. Web Configuration Login the switch: Specify the default IP address (192.168.1.10) of the switch in the web browser. A login window will be shown as below: 6 IES-1881 Manual