LevelOne IFP-0503 Quick Install Guide - Page 1

IFP-0503 5-Port Fast Ethernet Industrial PoE Switch, 4 PoE Outputs, 802.3at PoE Plus, 1 Port SC Single-Mode Fiber, 30km Quick Installation Guide v1.0 Power over Ethernet This switch is Power Sourcing Equipment (PSE), and it is fully complied with IEEE 802.3at PoE standard at maximum 30W power budget per port. It helps to save infrastructure wiring costs dramatically by eliminating electric wiring and less UPS needed. Also, it is compatible with IEEE802.3af standard PD devices. Overview The LevelOne IFP-0503 Industrial Fast Ethernet PoE+ Switch provides 4 ports at 10/100M TX PSE to supply power and internet to PoE+ compatible Powered Devices (PD) in a largescale indoor or outdoor network setting. The IFP-0503 supplies 15.4 Watts for IEEE802.3af or 30 Watts (Max 36W) for IEEE802.3at per port. Duplex mode Fibre allows installation up to 30km from the power source. With an industrial-standard DIN-rail mount for easy cabinet deployment and metal casing rated to IP30, this ruggedized switch is engineered for installation in industrial settings where humidity, dust, high or low operating temperatures or vibrations could cause standard devices to fail. High Reliability All components are built to withstand harsh environment applications without compromise where humidity, temperature variation and even shock vibration are concerns, including Electric & Utility, Critical Infrastructure, Transportation and Surveillance Security. This device operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature. Plug & Play This unmanaged Industrial Ethernet Switch is designed for the demanding industrial environments at businesses in need of instant connectivity with no setup or configure required, truly plug and play. IFP-0503 Page 1 Features • Meets NEMA TS1/TS2 Environmental requirements such as temperature, shock, and vibration for traffic control equipment • Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for industrial environment • Supports 1024 MAC addresses. Provides 1M bits memory buffer • Provides one Port SC Single-Mode Fiber with a maximum networking range of 30km. • Store-and-forward mechanism. Full wire-speed forwarding rate. • Power Supply: 44~56VDC Terminal Block power input. • 3.76W power consumption 48VDC full load • -40℃ to 75℃ (-40℉ to 167℉) operating temperature range. • Tested for functional operation @ -40℃ to 85℃ (-40℉ to 185℉). • Metal case design and compliant with IP30 standard Package Contents IFP-0503 Din rail*1, wall mount*2, terminal block*1, screw*4 Quick Installation Guide IFP-0503 Page 2 IFP-0503 Page 3