LevelOne IFS-0504 Quick Install Guide - Page 1

IFS-0504 5-Port Fast Ethernet Industrial Switch, 1 Port ST Multi-Mode Fiber, 2km Quick Installation Guide v1.0 Features • Meets NEMA TS1/TS2 Environmental requirements such as temperature, shock, and vibration for traffic control equipment • Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for industrial environment • Supports 1024 MAC addresses. Provides 1M bits memory buffer • Provides one Port ST Multi-Mode Fiber with a maximum networking range of 2km. • Store-and-forward mechanism. Full wire-speed forwarding rate. • Power Supply: 9~56VDC Terminal Block power input. • 3.76W power consumption 48VDC full load • -40℃ to 75℃ (-40℉ to 167℉) operating temperature range. • Tested for functional operation @ -40℃ to 85℃ (-40℉ to 185℉). • Metal case design and compliant with IP30 standard Package Contents IFS-0504 Din rail*1, wall mount*2, terminal block*1, screw*4 Quick Installation Guide IFS-0504 Page 2 Overview The LevelOne IFS-0504 Industrial Fast Ethernet Switch provides four ports at 10/100M TX and one multi-modal fiber port at 100M FX ST to enable high speed networks in missioncritical environments. With an industrial standard DIN-rail mount, this switch can be installed in a cabinet, and clearly visible status LEDs provide simple monitoring of port link activity. The multi-modal fiber port allows for large-scale connections of up to 2km. The switch is housed in a solid metal case rated at IP30, keeping it safe from dust, vibration, heat and humidity, while an operational temperature range of -40°C to +75°C makes it suitable for deployment in almost any environment. High Reliability All components are built to withstand harsh environment applications without compromise where humidity, temperature variation and even shock vibration are concerns, including Electric & Utility, Critical Infrastructure, Transportation and Surveillance Security. This device operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature. Plug & Play This unmanaged Industrial Ethernet Switch is designed for the demanding industrial environments at businesses in need of instant connectivity with no setup or configure required, truly plug and play. IFS-0504 Page 1 LED Status LED Status PWR 1, 2 ON OFF SW (relay) ON OFF 10/100/Base-TX ON LNK(1 ~ 4) OFF Flashing Fiber ON F5 OFF Flashing Description Power On Power Off both PW1 and PW2 are connected only PW1 or PW2 is connected TX link is detected TX port is not detected TX port is active FX fiber is detected FX fiber is not detected FX fiber is active IFS-0504 Page 3