LevelOne KVM-0260 Manual - Page 6

3. Installing the USB/DVI Cable KVM Switch 3.1. System Requirements 1. A PC with USB port and 1 DVI port. 2. Windows 98 or later, Mac OS 8/9/OS X, Linux Kernel 2.3 or later. 3. USB Keyboard and mouse. 4. Monitor with DVI port 3.2. Hardware Installation 1. Turn off computers. 2. Plug the USB keyboard, USB mouse, and monitor to the corresponding connectors on KVM Switch. 3. Plug the Speaker and Microphone to the corresponding jacks on KVM Switch. 4. Connect KVM switch cables to DVI, USB, Speaker and Microphone ports on computers. 5. Turn on computers Note: If the monitor can not support the maximum resolution it should have with KVM switch, please restart the computers to work out the problem. 3.3. Hot Swappable The 2-port USB/DVI Cable KVM Switch supports hot-swap technology. All the components can be added or removed at any time without shutting the PC down. 3.4. Driver Installation (Windows 98/SE only) After you connect the 2-port USB/DVI Cable KVM Switch to your PC, Win 98 will automatically detect the device and prompt for the driver installation. Please install the 2-port USB/DVI Cable KVM Switch by the following instruction from Step A-G. Please have your Windows 98 CD ready. 6