LevelOne KVM-0411 Manual - Page 6
Hardware Installation
View all LevelOne KVM-0411 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2. Hardware Installation The default setting of the KVM-0211/KVM-0411/KVM-0212/KVM-0412 is appropriate for most systems. The KVM Switch is a Plug-and-Play device for installation. In fact, user does not need to configure the KVM Switch before installation. For the first time installation of the KVM Switch, please follow the instructions below for setup sequence: 1. Connect the shared keyboard, monitor and mouse (and optional speaker set and microphone) to the KVM Switch first, and then connect the computers. 2. Power up your connected computers Since the KVM Switch receives power from the computer's PS/2 interface, it is powered up when user connects the KVM Switch to a PC. Please see next section for detail installation. 1.1 Step by Step Installation Take the companion CD, KVM Cables and the KVM Switch out of the box and follow the steps below for installation. 1. Make sure all the computers that are to be connected to the KVM Switch and their peripherals are in powered-off state. If not, power them off before proceed with the following steps. 2. Connect the shared PS/2 keyboard, PS/2 mouse, D-Sub monitor, speaker set and microphone to the KVM switch. 3. Connect each of the computers to the KVM switch, using appropriate KVM & Audio/MIC cables that companion with KVM switch in the package. Please note that the models KVM-0212 and KVM-0412 does not support audio switching function. 3