LevelOne KVM-0811 Manual - Page 14

Reset Button Push and release the reset button can reset KVM switch. This reset action will allow KVM switch to redetect connecting PC. If you add a new KVM Switch as a slave bank, please use reset button of master KVM Switch to automatically assign a new ID to it. You can view this new slave bank go through OSD menu. The PC ports of KVM Switch do not be reset by reset command. Keyboard Hot Key Commands You can also conveniently command KVM switch by switching ports through simple key sequences. To send commands to KVM switch, the "SCROLL LOCK" key must be pressed twice within 2 seconds. You will hear a beep for confirmation and the keyboard is in hot key mode. If you have not pressed any key in hot key mode within 2 seconds (It means to key in any key follows up "Scroll Lock" "Scroll Lock" key ), the keyboard will back to under Operation System control state. Below are the different hot key commands: within 2 seconds Scroll Lock + Scroll Lock + ↑ = Previous Channel Scroll Lock + Scroll Lock + ↓ = Next Channel Note: You also could press "up arrow key" or "down arrow key" longer time to speed up selecting the destination port) 11