LevelOne KVM-9006 Manual - Page 10
Hardware Installation
View all LevelOne KVM-9006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
3 Hardware Installation 3.1 Installation Diagram It is recommended to power off all the computers and server before the installation. If it is difficult to turn off the computers, for PS/2 computer, connect the Transmitter KVM-9006T and KVM-9006R in the following order: first the PS/2 mouse connector followed by PS/2 keyboard connector, and then the VGA connector to the computer. 1. Refer to the figure below. Turn the KVM-9006T / KVM-9006R upside down and plaster it with the four accompanied rubber food pads. 2. Make sure the CAT5 cable is straight through type. 3. Plug one end of CAT5 cable into RJ-45 connector of the KVM-9006T, and plug the other end of CAT5 cable into RJ-45 port of KVM-9006R. 4. Connect keyboard, mouse and monitor to the KVM-9006T /KVM-9006R console ports (USB Keyboard/Mouse ports and VGA port). 5. Connect local computer to KVM-9006T / KVM-9006R with the accompanied 3-in-1 VGA cable (see section "3-in-1 VGA Cable Installation" for detailed description). 8