LevelOne NVR-1204 Manual - Page 21
Install the Hard Disks
View all LevelOne NVR-1204 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Network Video Recorder Administrator's Manual Install the Hard Disks This system requires at least one hard disk to store video recordings and firmware image when upgrading system. Please follow the instructions below to install your hard disks in correct order to make sure the physical disk locations accord with the Disk ID shown in NVR server's Storage Device List. NVR-12XX Step 1 Remove the Case Cover Remove the four front panel screws, and then remove the three back panel screws. Slide the case backward until it stops, and then lift it up to remove. Step 2 Install Disk SATA-2 Insert Disk SATA-2 in the lower bay, connect SATA power cable and SATA data cable 2 to the hard disk. Make sure you connect the correct data cable to the corresponding disk. 21