LevelOne NVR-1209 Manual - Page 126
Setup, Maintenance, Firmware Upgrade, Browse, Upgrade, DO NOT cut off the system power or eject
View all LevelOne NVR-1209 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Network Video Recorder Administrator's Manual Upgrade Firmware 1. Make sure there is a recordable hard disk installed in NVR or a USB disk with at least 200MB space connected to NVR. 2. Go to Setup page Maintenance tab Firmware Upgrade. Click "Browse", find the target *.upg file and click "Open". 3. Click "Upgrade". During upgrading, the system will stop every other activity including recording and event handling. The system will auto-restart after the upgrading completes. As upgrading has started, DO NOT cut off the system power or eject the USB disk until NVR restarts. 126
Network Video Recorder
Administrator’s
Manual
126
Upgrade Firmware
1.
Make sure there is a recordable hard disk installed in NVR or a USB disk with at least
200MB space connected to NVR.
2.
Go to
Setup
page
Maintenance
tab
Firmware Upgrade
.
Click “
Browse
”,
find the
target *.upg file and click “
Open
”.
3.
Click “
Upgrade
”.
During upgrading, the system will stop every other activity including recording and event
handling. The system will auto-restart after the upgrading completes.
As upgrading has started,
DO NOT cut off the system power or eject the USB disk until
NVR restarts
.