LevelOne POR-0202 Quick Install Guide - Page 4
English, Deutsch
View all LevelOne POR-0202 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
English Hardware Installation Step 1: Connection to Power over Ethernet Switch A. Connect one of the Ethernet Switch port with PoE power supply to the PoE IN port of POR-02XX as the following connection. B. The LED indicators "POWER" and "PoE IN" will turn on indicating the PoE and Ethernet connection. C. The LED indicators "PoE IN" will flash to indicate Ethernet data activity. Step 2: Connection to PoE PD D. Connect the "PoE OUT" port of POR-02XX to power up the PD device as the following connection. E. The LED indicators "PoE OUT" will turn on indicating the PoE and Ethernet connection. F. The LED indicators "PoE OUT" will flash to indicate Ethernet data activity. ** Note: If the Ethernet cable is not standard CAT5 cable, the POR-02XX may be working for shorter length than 100 meter. Deutsch Hardware Installation Schritt 1: Anschluss an den Power over Ethernet Switch A. Verbinden Sie einen der Ethernet Switch Ports mit PoE Spannungsversorgung an den "PoE-In" Port des POR-02XX wie im oberen Diagramm gezeigt. B. DieLED Anzeigen "Power" und "PoE In" leuchten und zeigen eine Verbindung von PoE und Ethernet an. C. Die LED "PoE IN" blinkt, wenn Netzwerkaktivität besteht. Schritt 2: Anschluss an PoE PD D. Verbinden Sie den "PoE OUT" Port des POR-02XX zur Stromversorgung mit dem PD wie im oberen Diagramm gezeigt. E. Die LED "PoE OUT" leuchten und zeigen eine Verbindung von PoE ind Ethernet an. F. Die LED "PoE OUT" blinkt, wenn Netzwerkaktivität besteht. ** Hinweis: Wenn das Ethernet Kabel kein Standard Cat.5 Kabel ist, kann der POR-02XX nicht die vollen 100m gewährleisten.