LevelOne POT-0100 Datasheet - Page 1
LevelOne POT-0100 Manual
View all LevelOne POT-0100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
PoE Repeater over 2-wire (Master) H/W Version: 1 The POT system, one master & one slave units, provide a long-reach Ethernet extension with remote Powerover-Ethernet (PoE) capability over a 2-wire line. Connection with a Class 0 PD device, the distance of two-wire 24AWG cables can be up to 400 meters when using a 48Watt high power PoE Switch, FSW-0513/0543. Users may select a fixed data rate for different copper line ranging. The maximum data rate can be up to 60 Mbps full duplex for 2-wire line. The POT master unit is powered by the local PoE Ethernet network, and transmits both the data and power to the remote slave unit over 2-wire cable. The POT-0100 remote unit regenerates the power and provides the PoE capability to power up the remote PD device up to 15 watts when connecting to 48Watt High Power Switch, FSW-0513. The POT M/S supports the indoor & outdoor models with wall-mount feature. Equipped with dip switches, the 2-wire line speed can be configured to meet different line gauges and distances. A POT pair offers a cost effective solution for remote power applications such as LAN-to-LAN connectivity, Video Streaming, FTTB, and MDU/MTU over single twisted line. 1 2 3 4 1. LED Indicator 2. Dip Switch 3. RJ-11 Out 4. RJ-45 In Key Features - Two-wire cables are used to connect 100Mbps Fast Ethernet PoE devices - Maximum distance up to 500 meters for 24 AWG cable - Maximum data rate up to 60Mbps full duplex - Remote PoE capability for PD devices of WiFi AP, IP camera, IP telephones - Up to 15 Watts for remote PoE, Depending on PSE power - Easy installation by indoor & outdoor different models - Dip Switches for 2-wire line rate settings - Auto MDIX for 10/100 Base-Tx Ethernet LAN Ports - Low-Latency for Video/Voice/Data applications Works Well With POI-4000 High-power PoE Injector FSW-0513 4-Port High Power PoE Switch