LevelOne WAB-6120 Manual - Page 23
Using the External Antenna
View all LevelOne WAB-6120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Using the External Antenna If you prefer to use the external antenna with N-type connector for your application instead of the built-in directional antenna, please follow the steps below. 1. Grab the black rubber on the top of LEVELONE 150MBPS WIRELESS POE AP, and slightly pull it up. The metal N-type connector will appear. Figure 11 Move the Rubber 2. Connect your antenna with the N-type connector on the top of LEVELONE 150MBPS WIRELESS POE AP Note: If you are going to use an external antenna on LEVELONE 150MBPS WIRELESS POE AP, get some cable in advance. Be aware of the force you use while connecting to the N-type connector, inappropriate force may damage the N-type connector! Warning: Users MUST power off the LEVELONE 150MBPS WIRELESS POE AP first before connecting the external antenna to it. Do not switch from built-in antenna to the external antenna from WEB management without physically attaching the external antenna onto the LEVELONE 150MBPS WIRELESS POE AP; otherwise, damage might be caused to the LEVELONE 150MBPS WIRELESS POE AP itself. Chapter 2 Hardware Installation Page 12