LevelOne WAP-6101 Manual - Page 20

connected a Master AP AP1.

Get LevelOne WAP-6101 PDF manuals and user guides View all LevelOne WAP-6101 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Master to Slave WEC: 1. Trigger AP1 into WEC configuration process via pressing the WEC button for 3 second. Easy configure AP2 via 3 2. Trigger AP2 into WEC configuration process via WEC. pressing the WEC button for 3 second. 3. It takes 30 ~ 60 seconds for the device to finish the WEC configuration process. Master to Slave WEC: 1. Trigger AP1 into WEC configuration process via pressing the WEC button for 3 second. Easy configure AP3 via 4 2. Trigger AP3 into WEC configuration process via WEC. pressing the WEC button for 3 second. 3. It takes 30 ~ 60 seconds for the device to finish the WEC configuration process. 1. Install AP1 to its location first and verify its wireless network connectivity with a client device (Client3). 2. Install AP2 to its location and verify its wireless network connectivity with a client device (Client4) at the location beyond the service range of AP1. Besides, You can also check the AP2's WiFi Mount the devices AP1, LED, it should be "Solid Amber" if AP2 already 5 AP2, and AP3 to connected a Master AP AP1. expected locations. 3. Install AP3 to its location and verify its wireless network connectivity with a client device (Client1) at the location beyond the service range of AP1. In this case, AP3 is located out of the service range of AP1, you don't have to check AP3's WiFi LED, but you have to connect the AP3 with an Ethernet cable to the gateway.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
3
Easy configure AP2 via
WEC.
Master to Slave WEC:
1. Trigger AP1 into WEC configuration process via
pressing the WEC button for 3 second.
2. Trigger AP2 into WEC configuration process via
pressing the WEC button for 3 second.
3. It takes 30 ~ 60 seconds for the device to finish
the WEC configuration process.
4
Easy configure AP3 via
WEC.
Master to Slave WEC:
1. Trigger AP1 into WEC configuration process via
pressing the WEC button for 3 second.
2. Trigger AP3 into WEC configuration process via
pressing the WEC button for 3 second.
3. It takes 30 ~ 60 seconds for the device to finish
the WEC configuration process.
5
Mount the devices AP1,
AP2, and AP3 to
expected locations.
1. Install AP1 to its location first and verify its
wireless network connectivity with a client
device (Client3).
2. Install AP2 to its location and verify its wireless
network connectivity with a client device
(Client4) at the location beyond the service
range of AP1.
Besides, You can also check the AP2’s WiFi
LED, it should be “Solid
Amber
” if AP2 already
connected a Master AP AP1.
3. Install AP3 to its location and verify its wireless
network connectivity with a client device
(Client1) at the location beyond the service
range of AP1.
In this case, AP3 is located out of the service
range of AP1, you don’t have to check AP3’s
WiFi LED, but you have to connect the AP3 with
an Ethernet cable to the gateway.