LevelOne WAP-6111 WAP-6111H Quick Installation Guide - Page 4

Software Installation

Get LevelOne WAP-6111 | WAP-6111H PDF manuals and user guides View all LevelOne WAP-6111 | WAP-6111H manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

Software Installation To login to the LevelOne AP, please perform the following steps: 1. Check Your Network Settings to login web UI Please make sure your PC can get IP address automatically, so the router can communicate with your PC during configuration.  Select "Control Panel" > "Network Connections".  Right click the "Local Area Connection" and choose "Properties".  Select the TCP/IP protocol for your network card.  Click on the Properties button. You should then see the following screen and make sure you have selected "Obtain IP address automatically" 2. Launch a Web browser(Microsoft Internet Explorer 8 for example), enter the AP's Default LAN IP address 192.168.1.253 in the address bar, and then press Enter, as shown in the following picture. 3. The Enter the default user name of admin and password of admin in theUser Name and Password fields, click "OK" to access the AP's Web GUI. NOTE: The device works in FIT AP Mode by default, you can goto "Start → Device Mode" to change the Device Mode to FAT AP Mode. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
4
Software Installation
To login to the LevelOne AP, please perform the following steps:
1.
Check Your Network Settings to login web UI
Please make sure your PC can get IP address automatically, so the router can
communicate with your PC during configuration.
Select “Control Panel” > “Network Connections”.
Right click the “Local Area Connection” and choose “Properties”.
Select the TCP/IP protocol for your network card.
Click on the Properties button. You should then see the following screen and
make sure you have selected “Obtain IP address automatically”
2.
Launch a Web browser(Microsoft Internet Explorer 8 for example), enter the AP’s
Default LAN IP address 192.168.1.253 in the address bar, and then press Enter, as
shown in the following picture.
3.
The Enter the default user name of admin and password of admin in theUser
Name and Password fields, click “
OK
” to access the AP’s Web GUI.
NOTE:
The device works in FIT AP Mod
e by default, you can goto “
Sta
rt → Device
Mode”
to change the Device Mode to FAT AP Mode.