LevelOne WAP-6112 WAP-6112H User Manual - Page 55
Software upgrade
View all LevelOne WAP-6112 | WAP-6112H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
3) Restore to factory settings of device If users need to restore the device to its factory settings, enter into the Systems management -> Configuration management page, and click . Tip: 1) Do not cut off the device power supply in loading configuration, in order to avoid unexpected errors. 2) Restoring the device's factory settings will delete all the custom settings. It is strongly recommended that before restoring the factory configuration, first back up its configuration files. 3) The user name and password of the device's factory administrator are as follows: admin, and the default LAN port IP address/subnet mask is: 192.168.1.253/ 255.255.255.0. 4) After clicking , the device needs to be rebooted before restoring its factory settings. Software upgrade This section describes the System management-> Software upgrade page and the software upgrade procedure. In this page, you can view the information of the currently running version, and download the latest software from the LevelOne web site. Figure 8-5 Software upgrade Version information: Displays the information of the current hardware version, software version; Download the latest version: Goes to the official website of LevelOne to download the latest version of the software. Upgrading steps: 54