LevelOne WAP-6202 Quick Install Guide - Page 6
Configuring the Device
View all LevelOne WAP-6202 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Configuring the Device To set up and manage the WAP-6201/ WAP-6202, you can use one of the following methods: 1. Connect the access point and your computer to the same switch or router. Manage the access point from the computer. (for FAT AP Mode) 2. Connect the access point to a WAC-1000/WAC-1001. Connect your computer to the same network as that of the WAC-1000/WAC-1001. Manage the access point from the computer via the WAC-1000/WAC-1001.(for FIT AP Mode) Software Installation To login to the LevelOne AP, please perform the following steps: 1. Check Your Network Settings to login web UI Please make sure your PC can get IP address automatically, so the router can communicate with your PC during configuration. Select "Control Panel" > "Network Connections". Right click the "Local Area Connection" and choose "Properties". Select the TCP/IP protocol for your network card. Click on the Properties button. You should then see the following screen and make sure you have selected "Obtain IP address automatically" 6