LevelOne WNC-0305USB Manual - Page 9
Signal, Display PC
View all LevelOne WNC-0305USB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Data - Site Survey Screen Display PC To Select this check box to display ad-hoc (computer-to-computer) PC (Ad-Hoc) networks. Display 802.11b Select this check box to display 802.11b (infrastructure) net- Access Points works. Display 802.11g Select this check box to display 802.11g (infrastructure) net- Access Points works. Network Name Available wireless networks are listed. MAC Address This is the MAC address of the Access Point (or Wireless station, if the network is an Ad-hoc network). Security Data encryption and authentication methods used on the wireless network CH. The channel used by the Wireless network. Signal This is displayed as percentage (0 ~ 100%). Frequency The Wireless band used by this Wireless network. Network Type This will indicate "Infrastructure" (displayed device is an Access Point) or "Ad-hoc". (displayed device is a Wireless station) Status The area to the left of the "Rescan" button shows the current status. In the example above, it shows "Connected". Rescan Click this button to rescan for all Wireless networks. Wireless Network Sequence (order) You can click the headings (ex. Network Name, MAC Address, Security...) of the Wireless network table to arrange the Wireless network in the desired order. To Connect to an Open Wireless Network • Double-click on the desired network. or • Click the name of the wireless network to which you want to connect, and then click Connect. Note that once you are connected to a Wireless network, the Site Survey screen will identify the current wireless network with a blue icon, as shown below.