Lexmark 1020 Color Jetprinter Service Manual - Page 28
Initialize Error Log, the End-of-Form flag out of the sensor.
View all Lexmark 1020 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
4078-00X Initialize Error Log This test tracks intermittent errors. Use this procedure to reset the error log to zero. The error log is especially helpful in diagnosing intermittent or difficult problems. The test is complete when power is turned off. To run the test: 1. Place a sheet of paper in the sheet feeder far enough to push the End-of-Form flag out of the sensor. 2. With the printer off, hold down the Install Print Cartridge button while turning the printer on. 3-3
3-3
4078-00X
Initialize Error Log
This test tracks intermittent errors.
Use this procedure to reset the error log to zero. The error log is
especially helpful in diagnosing intermittent or difficult problems.
The test is complete when power is turned off.
To run the test
:
1. Place a sheet of paper in the sheet feeder far enough to push
the End-of-Form flag out of the sensor.
2. With the printer off, hold down the Install Print Cartridge
button
while turning the printer on.