Lexmark 10Z0252 User's Guide - Page 34
Printing on specialty media transparencies, labels, other
UPC - 734646032636
View all Lexmark 10Z0252 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Printing 4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges of the stack on a level surface. 5 Place the paper in the tray as shown, print side down. Do not load bent or wrinkled paper. Maximum stack height indicator Note: Do not exceed the maximum stack height. Overfilling the tray may cause jams. 6 Squeeze the front guide lever and slide the guide until it firmly touches the stack of paper. 7 Reinstall the tray. Make sure the tray is pushed completely into the printer. 8 If you are loading a different type of media than was previously loaded in the tray, change the Paper Type setting for that tray on the operator panel. For more information, see Printing on specialty media (transparencies, labels, other). Loading the trays 34