Lexmark 12N0009 Setup Guide - Page 40
Reinstalling the system board access cover, Place the cover against the printer
![]() |
UPC - 734646560092
View all Lexmark 12N0009 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Screw slot Reinstalling the system board access cover After you have finished installing cards on the printer system board, you must reinstall the system board access cover. 1 Align the holes on the access cover with the screws on the printer as shown. 2 Place the cover against the printer and slide it down. 34 Install memory and option cards 3 Tighten the eight screws.
![](/manual_guide/products/lexmark-12n0008-setup-guide-101bc9b/40.png)
34
Install memory and option cards
Reinstalling the system
board access cover
After you have finished installing cards
on the printer system board, you must
reinstall the system board access cover.
1
Align the holes on the access
cover with the screws on the
printer as shown.
2
Place the cover against the printer
and slide it down.
3
Tighten the eight screws.
Screw slot