Lexmark 12N0009 Finisher Setup and User's Guide - Page 19
Aligning the top ofthefinisher, To lower the finisher, rotate
UPC - 734646560092
View all Lexmark 12N0009 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Aligning the top of the finisher Follow these instructions if the alignment marks on top of the finisher are not aligned with the edges of the cover on the side of the printer. Note: Any time you move the printer or finisher, recheck printer and finisher top alignment. 1 Loosen the guide rail thumbscrews. If you made previous adjustments, the thumbscrews will already be loose. 2 Rotate the adjustment knobs as needed to raise or lower the side of the finisher. To raise the finisher, rotate the adjustment knobs clockwise. To lower the finisher, rotate the adjustment knobs counterclockwise. 3 Tighten the guide rail thumbscrews. 4 Roll the finisher toward the printer until the finisher locks to the docking pins. You hear a click when the finisher locks into position. Setup 15