Lexmark 13P0200 Setup Guide - Page 42
Close the tray
![]() |
UPC - 734646522007
View all Lexmark 13P0200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
4 Slide the bottom support toward the front of the tray until it touches the front guide. 5 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges of the stack on a level surface. 6 Place the paper against the back left corner of the tray, print side down. Do not load bent or wrinkled paper. 7 Close the tray. Make sure the tray is pushed completely into the printer. Note: Do not exceed the maximum stack height. Overfilling the tray may cause jams. 36 Load paper
![](/manual_guide/products/lexmark-13p0000-setup-guide-c98f30b/42.png)
36
Load paper
4
Slide the bottom support toward
the front of the tray until it touches
the front guide.
5
Flex the sheets back and forth to
loosen them, and then fan them.
Do not fold or crease the paper.
Straighten the edges of the stack
on a level surface.
6
Place the paper against the back
left corner of the tray, print side
down.
Do not load bent or wrinkled
paper.
7
Close the tray.
Make sure the tray is pushed
completely into the printer.
Note:
Do not exceed the maximum
stack height. Overfilling the tray may
cause jams.