Lexmark 16M1255 User Manual - Page 167
SMTP Setup menu, Secondary SMTP Gateway Port
View all Lexmark 16M1255 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Menu item Mac Binary PS On Off Auto Std Network Setup Reports or Network Reports Network Card TCP/IP IPv6 AppleTalk NetWare LexLink Net Setup Reports or Network Reports Network Card TCP/IP IPv6 Wireless AppleTalk NetWare LexLink Description Sets the printer to process Macintosh binary PostScript print jobs Notes: • Auto is the factory default setting. • The Off setting filters print jobs using the standard protocol. • The On setting processes raw binary PostScript print jobs. For descriptions and settings of the network setup menus, see the following: • "Network Reports menu" on page 168 • "Network Card menu" on page 168 • "TCP/IP menu" on page 169 • "IPv6 menu" on page 170 • "Wireless menu" on page 171 • "AppleTalk menu" on page 171 • "NetWare menu" on page 172 • "LexLink menu" on page 172 Note: The Wireless menu appears only when the printer is connected to a wireless network. SMTP Setup menu Use the following menu to configure the SMTP server. Menu item Primary SMTP Gateway Primary SMTP Gateway Port Secondary SMTP Gateway Secondary SMTP Gateway Port SMTP Timeout 5-30 Reply Address Use SSL Disabled Negotiate Required Description Specifies SMTP server port information Note: 25 is the default SMTP gateway port. Specifies the amount of time in seconds before the server stops trying to send the e-mail Note: 30 seconds is the factory default setting. Specifies server information. This is a required item. Notes: • The message box has a limitation of 512 characters. • Disabled is the factory default setting for Use SSL. Understanding printer menus 167