Lexmark 18H0770 Online User's Guide for Mac OS 8.6 to 9.2 - Page 63
Printing a banner
![]() |
UPC - 734646379496
View all Lexmark 18H0770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Lexmark Z45 Printer overview Basic printing Printing ideas Maintenance Troubleshooting Notices Index Using this Guide... Printing ideas 63 Printing a banner Note: Some software applications and some operating systems do not support banner printing. Step 1: Load the banner paper Make sure your banner paper is not used or damaged. 1 Remove any paper from the paper support. 2 Tear off enough pages for the banner including one extra sheet, and then place them behind the printer. 3 Load the unattached leading edge of the first page into the printer, with the right side against the paper support. Note: Forcing the paper too far into the printer may cause a paper jam. For help, see Clearing paper misfeeds or jams. www.lexmark.com
![](/manual_guide/products/lexmark-18h0770-online-users-guide-mac-os-86-92-9622cb5/63.png)
63
Printing ideas
Printer overview
Basic printing
Printing ideas
Maintenance
Troubleshooting
Notices
Index
Lexmark Z45
Using this
Guide...
www.lexmark.com
Printing a banner
Note:
Some software applications and some operating systems do not support
banner printing.
Step 1: Load the banner paper
Make sure your banner paper is not used or damaged.
1
Remove any paper from the paper support.
2
Tear off enough pages for the banner
including one extra sheet, and then place
them behind the printer.
3
Load the unattached leading edge of the first
page into the printer, with the right side
against the paper support.
Note:
Forcing the paper too far into the
printer may cause a paper jam.
For help, see
Clearing paper
misfeeds or jams
.