Lexmark 21Z0294 Printing guide - Page 4
Setting the Paper Size and Paper Type
UPC - 734646313247
View all Lexmark 21Z0294 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Printing guide Page 4 of 4 3 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 4 Load the paper stack with the recommended print side faceup. 5 Make sure the paper guides are secure against the edges of the paper. 6 Insert the tray into the printer. 7 If a different type of paper was loaded than the type previously loaded in the tray, change the Paper Type setting for the tray from the control panel. Setting the Paper Size and Paper Type The Paper Size setting is determined by the position of the paper guides in the tray for all trays except the multipurpose feeder. The Paper Size setting for the multipurpose feeder must be set manually. The factory default Paper Type setting is Plain Paper. The Paper Type setting must be set manually for all trays that do not contain plain paper. 1 Make sure the printer is on and Ready appears. 2 From the control panel, press . 3 Press repeatedly until Paper Menu appears, and then press . 4 Press 5 Press repeatedly until Paper Size/Type appears, and then press . repeatedly until the correct tray appears, and then press . 6 Press repeatedly until appears next to the correct size, and then press . 7 Press or repeatedly until the correct Paper Type setting appears, and then press . Submitting Selection appears.