Lexmark 21Z0300 Quick Reference - Page 7
Replacing a photoconductor, Warning-Potential Damage
UPC - 734646048965
View all Lexmark 21Z0300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
9 Insert the new waste toner box. 12 Close Door E. 2 Release the bar by pressing the E5 button located on the bottom of the E5 latch, lift the E5 latch, and then press the bar down. 10 Place the new printhead lens cleaner in the notches of Door E. 13 Remove all paper from the printer paper path. Visit www.lexmark.com/recycling to learn how to recycle the waste toner box. Replacing a photoconductor Replace the black photoconductor when 84 Replace black pc unit appears. Replace the cyan, magenta, and yellow photoconductors when 84 Replace color pc units appears. 1 Open Door E (front printer door). 3 Remove the photoconductor(s) specified on the display. Photoconductor color Opening name Black E1 Cyan E2 Magenta E3 Yellow E4 11 Close Door E6. Warning-Potential Damage: To avoid overexposing the photoconductors, do not leave the door open for more than 10 minutes. 7