Lexmark 22R0010 Menus and Messages - Page 13

Error Recovery JAM-A Tray, Rear JAM-B, Rear JAM-C, Rear Output Tray Full PM Error Replace Toner x Replace WT. Pack Set Belt CG Set Fuser Unit Set Transfer Roll Set Trayx Set x Toner CG SVC xxx ERROR Toner CG Error Trayx Load yyyy Trayy Load zzzz Understanding printer messages 1 Turn the printer off, and check all cable connections. 2 Turn the printer back on. If the service message recurs, call for service, and report the message number and description of the problem. A paper jam has occured. Remove the jammed paper. For more infomation, see the User's Guide on the Software and Documentation CD. The output tray is full. Remove all printed media from the output tray. A page memory error has occured. To clear the message, turn the printer off, wait 5 seconds, and turn the printer on. If the error message continues, call for service. The toner of color "x"-K (black), Y (yellow), M (magenta), or C (cyan)- has been exhausted. Replace the toner cartridge for that color. The waste toner bottle is full or missing. Replace or install a waste toner bottle. The photodeveloper belt is missing or not installed correctly. Install or reseat the photodeveloper belt. For more infomation on installing the photodeveloper belt, see the User's Guide on the Software and Documentation CD. The fuser is missing or not installed correctly. Install or reseat the fuser. For more infomation on installing the fuser, see the User's Guide on the Software and Documentation CD. The transfer roller is missing or not installed correctly. Install or reseat the transfer roller. The paper tray x is missing or not installed correctly. Install or reseat the indicated paper tray. For more infomation on installing paper trays, see the User's Guide on the Software and Documentation CD. The toner of color "x"-K (black), Y (yellow), M (magenta), or C (cyan)- is missing or not installed correctly. Install or reseat the indicated toner cartridge. For more infomation on installing toner cartridges, see the User's Guide on the Software and Documentation CD. 1 Turn the printer off, and check all cable connections. 2 Turn the printer back on. If the service message recurs, call for service, and report the message number and description of the problem. An invalid toner cartridge is installed. Remove the toner cartridge, and install a supported one. The specied paper tray (x) does not contain the correct media size (yyyy). Load the indicated media size. For more information, see Media size indications (yyyy). The specied paper tray (x) does not contain the correct media type (zzzz). Load the indicated media type. For more information, see Media type indications (zzzz). 13