Lexmark 2380 Service Manual - Page 104

Lower Feed Roller Removal 1. Remove the tractor assembly see "Push Tractor Assembly Removal" on page 4-53. 2. Remove the top cover see "Top Cover Removal" on page 4-61. 3. Remove the pull tractor actuator see "Pull Tractor Removal" on page 4-50. 4. Remove the paper select lever see "Paper Select Lever Removal" on page 4-42. 5. Remove the printhead see "Printhead Removal" on page 4-48. 6. Remove the sub logic board see "Sub Logic Board Removal" on page 4-59. 7. Remove the paper feed motor see "Paper Guide / Platen Assembly Removal" on page 4-40. 8. Remove the carrier see "Carrier Removal" on page 4-12. 9. Remove the upper feed roller see "Upper Feed Roller Removal" on page 4-66. 10. Remove the lower pinch roller see "Lower Pinch Roller Removal" on page 4-32. 11. Remove the gears on the right side frame see "Right Side Frame Gears Removal" on page 4-58. 12. Remove the print unit see "Print Unit Removal" on page 4-47. 13. Remove the right side frame see "Right Side Frame Removal" on page 4-56. 14. Remove the idler gear [1], then remove the left feed roller lower gear [2]. 15. Release the latch, and then remove the left lower bushing [3]. 16. On wide carriage machines remove the ground strap from the center of the platen. 17. Release the notch on the left of the lower feed roller [4] from tab [A] on the left side frame, and then remove the lower feed roller. 18. Be sure to perform the Printhead-to-Platen Gap Adjustment see "Printhead-to-Platen Gap Adjustment" on page 4-2. 4-30