Lexmark 23B0225 User Reference - Page 73
NPA Mode, PCL SmartSwitch, USB Buffer, in the Setup Menu if PS SmartSwitch
UPC - 734646782265
View all Lexmark 23B0225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Menu Item Purpose Values NPA Mode To specify whether the printer performs the special processing required for bidirectional communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol. Note: Changing this menu item automatically resets the printer. On Off Auto* Printer performs NPA processing. If data is not in NPA format, it is rejected as bad data. Printer does not perform NPA processing. Printer examines the data to determine the format and then processes it appropriately. PCL To configure the printer so it On* SmartSwitch automatically switches to PCL emulation when a print job received through the USB port requires it, regardless of the default printer language. Off Printer examines the data on the USB interface and selects PCL emulation if the data indicates that is the required printer language. Printer does not examine the incoming data. The printer uses PostScript emulation to process the job if PS SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PS SmartSwitch is Off. PS To configure the printer so it On* SmartSwitch automatically switches to PostScript emulation when a print job received through the USB port requires it, regardless of the default printer language. Off Printer examines data on the USB interface and selects PostScript emulation if the data indicates that is the required printer language. Printer does not examine the incoming data. The printer uses PCL emulation to process the job if PCL SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PCL SmartSwitch is Off. USB Buffer To configure the size of the USB input buffer. Note: Changing the USB Buffer menu item automatically resets the printer. Disabled Auto* Job buffering is disabled. Any jobs already buffered on the disk are printed before normal processing of incoming jobs resumes. Printer automatically calculates the USB Buffer size (recommended setting). 3K to maximum size allowed User specifies the USB Buffer size. The maximum size depends on the amount of memory in your printer, the size of the other link buffers, and whether Resource Save is set to On or Off. To maximize the range for the USB Buffer size, disable or reduce the size of the parallel, serial, and network buffers. 73